OCHFA10
2024/01/30
Features
optical size of 1/18"
non-autoclavableanalog output
single 3.3V power supply
on-chip PLL
serial peripheral interface (SPl)
exposure and gain control
pseudo-global shutter (LED mode)
PureCel@plus-S pixel structureimproved sensitivity, FWC, zero blooming, low noise.and low power consumptionenhanced NlR sensitivity
square aspect ratio
minimum package size (total 4 pads)
4m drive distance
different lengths of cable and LED configurations areavailable upon request
Key specifications (typical)
active array size: 700 x700
power supply:
analog: 3.3V +5%
power requirements:25 mW (with lO consumption)temperature range:operating:-20 ℃ to 70 ℃ junction temperaturestable image: 0℃ to 50 ℃junction temperatureoutput formats: analog signal output
optical size: 1/18"
diagonal field-of-view (FOV): 120°+3°
fno.: 5.0
focal length: 0.418 mmmaximum exposure: 2480 x Tline
scan mode: progressive
frame rate: 490 Kpixel (700x700): 30 fps
max S/N ratio: TBD
linear dynamic range: TBD
sensitivity: TBD
color mosaic: RGB Bayer pattern
pixel size: 1.008 um x 1.008 um
image area: 733.824 um x 733.824 ym
tip x-y dimension:maximum x-dimension: <1.15 mmmaximum y-dimension: <1.15 mm
rigid parts z-dimension: <5 mm
cable diameter:0.52 +0.1 mm(OCHFA10-KL1C-0B2A-Z)0.45 +0.03 mm(OCHFA10-KL1E-0B2E-Z)0.43 +0.03 mm(OCHFA10-KL1C-0A3E-Z
cable length:
1500 +20 mm(OCHFA10-KL1C-0B2A-Z)2500+20 mm(OCHFA10-KL1E-0B2E-Z)1500+20mm(OCHFA10-KL1C-0A3E-Z)
end connector PCB:
15.6 mm x 25 mm; 0.1" pitch (6-pin connector A)10.6 mm x25 mm: 0.1" pitch (4-pin connector B)
Prev：