OH01A10
2024/01/30
Features
highest resolution in small die size
best image quality
high frame rate for jitter-free images
PureCel@ high color fidelityhigh FWC with less saturationbest low light sensitivityalmost no bloominglow noise
better color crosstalk
higher QE performance
supports images sizes:1MP(1280x800),720p(1280x720).800x800.VGA(640x480).400x400.and more
stereo ready (frame sync)
sync light source (strobe)
horizontal and vertical subsampling
low power
more than 25% lower power than previousgeneration
low power mode for subsampling modes (<10mW)
on-chip phase lock loop (PLL)
2x2 analog binning
image quality controls: lens shading, denoisemanual exposure, gain control, defect pixelcorrection, and automatic black level calibration
group hold
output format can be 8/10-bit RGB RAW
Key specifications (typical)
active array size:1280 x800
power supply:
analog: 2.7 to 3.0V (2.8V nominal)core: 1.14 to 1.26V(1.2V nominal)1/0:1.7 to 1.9V (1.8V nominal)
power requirements:
active: 82.2 mW
standby: 0.5 mA
XSHUTDN:2 MA
temperature range:
operating: -30°C to +85°C junction temperature(see table 7-2)
stable image: 0'C to +60'C junction temperature
(see table 7-2)
output interface:1-lane MiP| serial output/LVDS
output formats: 10-bit RGB RAV
input clock frequency: 6~27 MHz
lens chief ray angle: up to 32° non-linear (see
figure 9-3)
maximum image transfer rate:1MP (1280 x 800): 60 fps800x800: 60 fps400x400: 90 fpssensitivity:4.500 e/Lux-secmax S/N ratio: 36.8 dBdynamic range: 72.2 dB @ 16x gainminimum exposure:4-rowmaximum exposure: VTS-8pixel size: 1.116 um x 1.116 umimage area: 1446.34 um x 910.66 umpackage dimensions: 2533 um x 1534 um
lens size: 1/11"
Next：